One-Step Polish 500ml Low Dust Silicone-Free Deep Gloss, Cartec

Quick Facts – Cartec One-Step Polish

• Brand: Cartec
• Model: Final Cut 9000
• Volume: 500 ml
• Type: One-step polish (cut + finish)
• Dust generation: Low
• Contents: Free from silicone, ammonia and fillers
• Recommended pad: 150mm polishing pad

Cartec Final Cut 9000 is a one-step Polish for car paintwork that removes swirl marks, holograms and dullness in a single step. The paste combines cut and finish, saving time when polishing with a DA polisher or Rotary polisher. The low dust generation keeps the working environment cleaner, both in the paint shop and at home in the garage.

The product contains neither silicone, ammonia nor fillers, meaning the result doesn't hide defects but actually removes them mechanically. The recommended polishing pad is 150mm, and Final Cut 9000 works with both dual action machines and rotary polishers. See more polishing pads for polishing machines to complement the product.

Final Cut 9000 suits both professionals in paint shops and detailing enthusiasts who want to achieve deep gloss without spending too much time on each panel.

Key benefits of Cartec Final Cut 9000

The key benefits of Cartec Final Cut 9000 are primarily time savings and efficient use. The paste delivers deep, mirror-like gloss in a short time thanks to cut and finish happening in the same step. Low dust generation and the absence of silicone, ammonia and fillers make the product suitable for professional use in paint shops.

A small amount of product goes a long way, as three pea-sized drops per 150mm pad are enough to cover an area of roughly shoulder-width by six pad diameters. This lowers the cost per vehicle for valeting workshops and detailing studios that polish daily.

Is Cartec Final Cut 9000 suited to paint shops and home garages?

Yes, Final Cut 9000 works both in professional paint shops and in home garages for enthusiasts with a polishing machine.

• Valeting workshops and car care companies
• Detailing studios working on paint correction
• Car enthusiasts with a DA polisher or Rotary polisher
• Preparation before Ceramic Coating

Technical Specifications

Suitable for: detailing studios, valeting workshops, car care companies and car enthusiasts who polish with a DA polisher or Rotary polisher. More Cartec products are available in our range for those looking to complement their paint care.

Industries: detailing, vehicle care, valeting industry, paint shops.

Frequently Asked Questions (FAQ)

Does Cartec Final Cut 9000 work on paintwork with deep scratches or stone chips?

No, Cartec Final Cut 9000 is primarily designed for surface-level defects such as holograms, dullness and light swirl marks. Deeper scratches or stone chips often require a coarser Compound or wet sanding before this polish is used as a finishing step.

How should Cartec Final Cut 9000 be stored and handled safely?

Cartec Final Cut 9000 should be stored between 5 and 25 degrees Celsius, protected from direct sunlight and heat. The product should be kept out of reach of children and not used on hot surfaces or in direct sunlight, which reduces the risk of the paste drying out too quickly during polishing.

What sets Cartec Final Cut 9000 apart from other one-step polishes?

Cartec Final Cut 9000 stands out by being completely free from silicone, ammonia and fillers while producing low dust during use. Many one-step products compromise on either gloss results or dust levels, whereas this paste combines cut and finish without leaving fillers that hide defects.