Cutting Compound 1kg Deep Scratch Removal High Gloss Low Dust Silicone-Free, Cartec

Quick Facts – Cartec Abrasive Compound

• Brand: Cartec
• Model: Rapid Cut 4000
• Volume: 1 kg
• Type: Abrasive Compound
• Grit size corrected: P1500 and above
• Dust generation: Low
• Composition: Free from silicone, ammonia and fillers
• Finish: High-gloss after just the first polishing step

Cartec Rapid Cut 4000 is an abrasive Compound in a 1 kg tub that removes deep scratches and sanding marks from P1500 and above in a single step. The formulation delivers a high-gloss finish after just the first polishing step, saving time during paint correction. The product is free from silicone, ammonia and fillers.

The low dust generation keeps the work area clean during polishing and makes the process easier in a workshop environment. Residue wipes away easily with a clean microfibre towel, leaving no streaks. See more microfibre towels for car care.

The Compound is designed for application with a DA polisher or rotary polisher and a 125 mm polishing pad, suiting both detailing professionals and enthusiasts.

Key Benefits of Cartec Rapid Cut 4000

Cartec Rapid Cut 4000 delivers fast, deep correction while remaining easy to work with. The even application and low dust release reduce clean-up time in the workshop, and the silicone-free composition protects both the paintwork and subsequent treatment steps such as Ceramic Coating or Sealant.

Residue wipes away without leaving streaks, making it possible to move straight on to the next polishing step or to a finishing Polish.

Where Cartec Rapid Cut 4000 Performs Best

• Reconditioning workshops correcting deep scratches and sanding marks
• Detailing studios working with multi-stage polishing
• Car care companies needing fast paint correction before delivery
• Enthusiasts carrying out polishing steps by hand or with a DA polisher

Technical Specifications

Suitable for: detailing studios, reconditioning workshops, car care companies and enthusiasts wanting to correct deep scratches and sanding marks on car paintwork. Polishing pads for DA polishers complement the treatment.

Industries: detailing, car care, the reconditioning industry and car workshops.

Frequently Asked Questions (FAQ)

Does Cartec Rapid Cut 4000 work in direct sunlight or on hot surfaces?

No, Cartec Rapid Cut 4000 should not be used on hot surfaces or in direct sunlight. The product should be stored between 5°C and 25°C, protected from heat, to maintain its abrasive properties.

How much product is needed when applying Cartec Rapid Cut 4000?

Cartec Rapid Cut 4000 is applied using around six pea-sized drops per 125 mm polishing pad. The product is spread over an area roughly equivalent to arm's length by six times the pad's diameter before polishing begins.

What sets Cartec Rapid Cut 4000 apart from other abrasive compounds?

Cartec Rapid Cut 4000 stands out through its combination of fast cutting action, low dust generation and a silicone-, ammonia- and filler-free composition. This delivers a high-gloss finish after just the first step, which many competing compounds fail to achieve without further polishing.