Rust Neutraliser + Epoxy Primer Anti-Corrosion Spray 400ml, MA Pro Detailing

Quick Facts – MA Pro Detailing Rust Neutraliser + Epoxy Primer

• Brand: MA Pro Detailing
• Model: MA000049
• Volume: 400 ml spray can
• Technology: Epoxy-based rust neutraliser and primer in one step
• Drying Time: Approximately 6–8 hours to full cure
• Application Temperature: 8–25°C
• Compatibility: Polyester filler, acrylic primer and most paint types
• Format: Spray can for even application, even in hard-to-reach areas

MA Pro Detailing's Rust Neutraliser with Epoxy Primer stops corrosion directly on rusty metal surfaces while simultaneously building a tight primer coating in one single step. The product is designed for bodyshops and detailing studios that need a quick and reliable solution before further paintwork. The 400ml spray format gives even coverage, even on edges and hard-to-reach areas.

The formulation reacts chemically with the rust and neutralises it, while forming a protective epoxy layer that seals out moisture and oxygen. Once the surface has fully cured, it is ready for filling, priming or painting with most product types on the market. See more anti-rust products for bodywork in our range.

Why reconditioning workshops choose MA Pro Detailing's Rust Neutraliser

Reconditioning workshops and car care companies choose this product because it acts directly on rust damage without the metal needing to be sanded down to bare metal. The epoxy technology provides an elastic and durable protective coating that serves as a solid base for further paintwork.

• Acts directly on rust damage without full blasting down to bare metal
• Epoxy-based technology provides an elastic and highly durable protective coating
• Broad compatibility with polyester filler, acrylic primer and paint
• Long-lasting protection against recurring rust on treated surfaces
• Spray format gives even application, even in confined spaces

Where MA Pro Detailing's Rust Neutraliser performs best

The product performs best for spot treatment of rust damage on body panels, underbody, chassis and other metal surfaces prior to painting or filling.

• Bodyshops and reconditioning workshops
• Spot repairs on chassis and underbody
• Pre-treatment before filling and painting
• Vehicle restoration, for example around weld seams and edges

Technical Specifications

Suitable for: Detailing studios, reconditioning workshops, car care companies and bodyshops that need a quick rust treatment before painting.

Industries: Vehicle care, detailing, bodywork and paintwork industry, reconditioning industry.

Frequently Asked Questions (FAQ)

Does MA Pro Detailing's Rust Neutraliser work for larger rust damage on entire body panels?

No, the product is primarily intended for spot treatment of localised rust damage rather than large continuous rust damage. For more extensive damage, mechanical removal of loose rust is recommended before application, followed by several coats of MA Pro Detailing's Rust Neutraliser. More products for bodywork repair are available in our range.

How do you clean the spray nozzle after using MA Pro Detailing's Rust Neutraliser?

After finishing application, turn the spray can with the valve facing down and press the nozzle for a few seconds until only gas is released. This prevents the product from drying and clogging the nozzle before the next use of MA Pro Detailing's Rust Neutraliser.

What sets MA Pro Detailing's Rust Neutraliser apart from other rust protection products?

Unlike traditional rust converters, MA Pro Detailing's Rust Neutraliser is based on epoxy technology that both neutralises active rust and acts as a primer in the same step. This reduces the number of work steps compared with separate rust converters and primers.