Microfibre Towel 40x40 cm Laser-Cut Seamless 340gsm High Absorbency, K2

Quick Facts – K2 Microfibre Towel

• Brand: K2
• Model: K2000159
• Size: 40x40 cm
• Weight: 340 gsm
• Material: 80% polyester, 20% polyamide
• Edge: Laser-cut, seamless design
• Use: Car exterior and interior

The K2 Bona Microfibre Towel is a laser-cut microfibre towel measuring 40x40 cm with a weight of 340 gsm, designed for polishing, applying Coating and removing polishing residue. The towel is also suitable for cleaning upholstery and plastic trim inside the car.

The seamless edge is created through laser-cutting, which eliminates the risk of scratches that traditional stitched edges can cause. The combination of polyester and polyamide provides high absorbency and a surface that is gentle on paintwork, glass and plastic.

See more microfibre towels for car care if you need additional towels for different tasks.

What sets the K2 Bona Microfibre Towel apart?

What sets this towel apart is the laser-cut, seamless edge combined with its weight of 340 gsm. This provides scratch-free cleaning while the towel absorbs large amounts of liquid and dust without smearing dirt across the surface.

The composition of 80% polyester and 20% polyamide means the towel works well with Polish, Quick Detailer, and for drying water after washing.

Where the K2 Bona Microfibre Towel performs best

• Polishing and applying Coating or Sealant
• Removing polishing residue after Compound
• Cleaning upholstery and plastic trim in the cabin
• Wiping down after washing paintwork and glass
• General household cleaning where high absorbency is needed

Technical Specifications

Suitable for: Detailing studios, reconditioning workshops, car care businesses and private individuals who carry out polishing, Coating application and interior cleaning themselves.

Industries: Detailing, car care, the reconditioning industry and household cleaning.

Frequently Asked Questions (FAQ)

Is the K2 Bona Microfibre Towel suitable for sensitive fabric surfaces in the car?

No, the K2 Bona Microfibre Towel is not recommended for surfaces that are sensitive to fabric contact. The towel is, however, safe for paintwork, glass and plastic, where it provides scratch-free cleaning without leaving marks.

How do you clean the K2 Bona Microfibre Towel between uses?

Rinse the K2 Bona Microfibre Towel thoroughly after each use and allow it to air dry naturally. Avoid fabric softener and bleach, as these can negatively affect the absorbency of the microfibres over time.

How does the K2 Bona Microfibre Towel differ from standard microfibre towels?

The difference lies in the laser-cut, seamless edge, which eliminates stitched edges entirely, combined with the weight of 340 gsm. This makes the K2 Bona Microfibre Towel gentler on paintwork compared with towels with traditional seams, while also providing higher absorbency. See also more K2 products for car care for complementary professional-grade products.