Microfibre Car Drying Towel Twisted Pile 1500gsm 40x40cm, Cleantle

Quick Facts – Cleantle Microfibre Towel

• Brand: Cleantle
• Model: CLE000272
• Dimensions: 40 × 40 cm
• Weight: 1500 g/m²
• Weave: Double-sided twisted pile
• Material: Microfibre
• Reusable: Wrung out and reused
• Washable: Up to 40°C

Cleantle Mini Looper is a microfibre towel measuring 40 × 40 cm with a double-sided twisted pile weave and a weight of 1500 g/m². The twisted fibre structure draws water through the entire thickness of the material rather than just on the surface. As a result, a small towel can dry an entire car without needing a second one. See more microfibre towels for car care if you need additional sizes.

The twisted pile weave works like a series of small wicks that draw water in between the twists and hold it deep within the material. The 1500 g/m² weight means two and a half times more material per square metre than the larger Cleantle Looper. While the Looper (70 × 90 cm) collects water over a large area at once, the Mini Looper relies on the thickness of the material and fits neatly in the palm of your hand.

Once the towel is saturated, simply wring it out and continue using it. It withstands repeated washing and is gentle on paintwork, glass and wheels.

What makes Cleantle Mini Looper a strong choice for detail drying?

Cleantle Mini Looper performs well for detail drying because it reaches into tight areas such as wing mirrors, door pillars and bumpers, where a large towel is difficult to manage. The double-sided weave means both sides dry, so the towel can be turned over once one side is saturated. The 40 × 40 cm size makes it easy to hold in one hand while drying the car with the other.

How Cleantle Mini Looper is used for detail drying

• Paintwork, glass and wheels after washing
• Wing mirrors, door pillars and bumpers that are difficult to reach with a large towel
• Quick supplementary drying of smaller areas between wash stages

Technical Specifications

A fit for: Detailers, reconditioning workshops, mobile detailing technicians, paint care specialists and car enthusiasts who want a compact towel for hard-to-reach areas.

Typical settings: Detailing studios, reconditioning workshops, car care businesses and home garages where mirrors, pillars and wheels are dried after washing. More products can be found via Cleantle products for vehicle care.

Frequently Asked Questions (FAQ)

Can Cleantle Mini Looper be washed with fabric softener without affecting performance?

No. Fabric softener coats the fibres of the Cleantle Mini Looper and reduces the towel's ability to absorb water. Instead, wash at a maximum of 40°C and avoid fabric softener altogether to preserve the towel's performance.

Can Cleantle Mini Looper be ironed or tumble-dried on high heat?

No. The Cleantle Mini Looper should be dried at low temperature or air-dried, and it should not be ironed. High heat and irons can damage the twisted pile structure that gives the towel its absorbency.

What is the difference between Cleantle Mini Looper and Cleantle Looper when drying a car?

The Cleantle Mini Looper is smaller, 40 × 40 cm compared with 70 × 90 cm for the Cleantle Looper, but it has a weight of 1500 g/m², which is two and a half times more material per square metre. The Cleantle Looper dries large areas at once thanks to its size, while the Mini Looper draws water deep into the thickness of the material and is best suited to details such as mirrors, pillars and wheels.