Iron Remover and Lime Scale Remover 500ml, CARPRO

Quick Facts – CARPRO IronX LimeScale

• Brand: CARPRO
• Model: CAR000768
• Type: Iron remover and lime scale remover (2-in-1)
• Volume: 500 ml
• Application area: Paint surfaces, windows, wheels and other exterior surfaces
• Packaging: Spray bottle 500 ml

CARPRO IronX LimeScale is a dual-function decontamination product that combines an iron remover with a mineral deposit (lime scale) remover. The product is developed to address brake dust, iron particles and stubborn water-based mineral deposits in a single application.

By merging two separate decontamination steps into one, IronX LimeScale reduces the total working time during paint preparation. The surface is left clean, smooth and ready for subsequent Coating, Polish or Sealant.

The product is suited to professional detailers and reconditioning workshops that operate with efficient and structured decontamination processes. See more CARPRO products for car care in our range.

What is IronX LimeScale and why choose it?

CARPRO IronX LimeScale is a combination product that dissolves embedded iron particles – such as brake dust and railway deposits – whilst simultaneously breaking down mineral deposits and lime scale from hard water (so-called water spots). Traditionally, these two types of contamination require separate products and separate application steps, which IronX LimeScale eliminates.

The product contributes to a more thorough surface preparation prior to polishing or applying protective coatings, without compromising the cleaning result. For detailers and car care businesses operating at high volumes, this represents a measurable time saving per vehicle.

Where is this product suitable?

• Professional reconditioning workshops and detailing studios
• Car care businesses with regular decontamination in their workflow
• Detailing enthusiasts preparing vehicles prior to Coating or Polish
• Vehicles with visible iron deposits from brake dust or railway environments
• Vehicles with lime scale from hard water or automatic car washes

Technical Specifications

Suitable for: Professional detailers, reconditioning workshops, car care businesses and detailing enthusiasts seeking an efficient and time-saving decontamination solution prior to paint care.

Industries: Detailing, car care, reconditioning, vehicle preparation prior to Coating and Polish.

Instructions for use:

1. Shake the bottle before use.
2. Wash the vehicle and rinse it off – the surface may be damp.
3. Spray CARPRO IronX LimeScale onto the contaminated area.
4. Allow the product to dwell for 30–120 seconds, then work it in with a wash mitt.
5. Rinse thoroughly with a pressure washer.
6. Dry the vehicle.

Safety instructions:

• Always test the product on a hidden surface before full application.
• Exercise extra caution on untreated aluminium surfaces.
• Do not use on anodised surfaces.
• Do not use on fabric convertible roofs or rubber containing recycled tyre material.
• Use in well-ventilated areas or outdoors. Wear protective gloves.

See also more iron removers and decontamination products for professional use.

Frequently Asked Questions (FAQ)

Does CARPRO IronX LimeScale work for removing brake dust from wheels?

Yes, CARPRO IronX LimeScale is developed to dissolve embedded iron particles, including brake dust on wheels and paint surfaces. The product reacts chemically with the iron particles, making them straightforward to rinse away. As IronX LimeScale also removes lime scale deposits in the same step, it is well suited as a comprehensive decontamination product for wheel cleaning and paint preparation.

What volume and contact time apply to CARPRO IronX LimeScale?

CARPRO IronX LimeScale is supplied in a 500 ml spray bottle. The recommended contact time is 30–120 seconds depending on the degree of surface contamination and prevailing weather conditions. The product must not be allowed to dry on the surface – in warm or sunny weather, the contact time should be kept shorter and the surface kept damp during treatment.

What distinguishes CARPRO IronX LimeScale from a standard iron remover?

A standard iron remover addresses only iron particles and brake dust, whereas CARPRO IronX LimeScale combines iron removal with active elimination of mineral deposits and lime scale (water spots) from hard water. This means two separate decontamination steps can be carried out in a single application, saving time and reducing the number of products in the workflow. For professional detailers and reconditioning workshops operating at high volumes, this is a practical advantage compared with using separate products.