Deironization Bleeding Wheel Gel, 500g, CARPRO

Deironization Bleeding Wheel Gel, 500g

Introducing the Deironization Bleeding Wheel Gel, a concentrated gel formula designed to tackle the toughest metallic contaminants. Its thick consistency ensures prolonged contact with surfaces, allowing for more intensive and precise cleaning, especially on wheels, wheel arches, and lower body panels.

Main Benefits

• Gel Consistency – Longer action time for more effective decontamination.
• High Efficacy – Removes brake dust, rust deposits, and other metallic contaminants.
• Surface Safe – Will not damage paint, wheels, glass, or plastic components.
• Ideal for Wheels – Particularly effective on aluminum and painted wheels.
• Visual Reaction – Changes color to dark purple during the cleaning process.
• Coating Compatible – Does not affect protective layers.

Typical Use Cases

This gel is perfect for deep cleaning and chemical decontamination of hard-to-reach areas, making it an ideal choice for detailers and car enthusiasts seeking maximum effectiveness where traditional liquid cleaners may fall short.

Technical Specifications

• Capacity: 500g

Usage Instructions

1. Ensure the surface is cool before application.
2. Apply the gel directly onto the contaminated area using a brush or applicator.
3. Allow it to sit for a few minutes, ensuring it does not dry.
4. Observe the color change to purple as it reacts with contaminants.
5. Use a brush if necessary to enhance effectiveness.
6. Rinse thoroughly with water under pressure.
7. Repeat if necessary.

Precautions

• Do not use on hot surfaces or in direct sunlight.
• Avoid contact with eyes and skin; rinse with water if contact occurs.
• Keep out of reach of children.
• Test on an inconspicuous area before full application.

FAQ

• Can this gel be used on all types of wheels?
  Yes, it is safe for use on aluminum and painted wheels.
• What should I do if the gel dries on the surface?
  Reapply the gel and rinse immediately with water to remove any residue.
• Is it safe to use on coated surfaces?
  Yes, it is compatible with protective coatings and will not cause damage.