Concentrated Cleaner for Belts and Upholstery, 750ml, Pure Chemie Attack

Concentrated Cleaner for Belts and Upholstery, 750ml

Discover the power of our Concentrated Cleaner for Belts and Upholstery, a versatile solution designed to tackle a wide range of stains, including oil, grease, beverages, and organic marks. Perfect for cleaning fabrics, plastics, and various surfaces, this cleaner is your go-to for maintaining pristine interiors.

Main Benefits

• Effectively removes tough stains and discolorations.
• Can be applied using a sprayer or foamer for convenience.
• Suitable for both upholstery and belt cleaning.

Typical Use Cases

• Cleaning heavily soiled upholstery.
• Restoring the appearance of seat belts.
• Maintaining cleanliness of plastic surfaces.

How to Use

• For upholstery: Dampen with warm water, apply the solution, brush, wait 3-4 minutes, and rinse with a wet vacuum.
• For belts: Soak in hot water (45-60°C), apply the solution, wait 5-10 minutes, scrub, and wipe with microfiber or vacuum.

Technical Specifications

• Capacity: 750 ml
• Contains non-ionic surfactants (less than 5%), fragrance compositions (linalool, butylphenyl methylpropional), and benzisothiazolinone.
• Concentration ratios: 1:1 for belts, 1:7 to 1:25 for upholstery, 1:7 to 1:15 for headliners.

Safety Information

Warning: Causes skin irritation and serious eye damage. Wear protective eyewear. In case of skin contact, wash with plenty of water. If in eyes, rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Seek medical advice if irritation persists. Keep out of reach of children. Dispose of waste according to local regulations.

FAQ

Can this cleaner be used on all types of upholstery?

Yes, it is suitable for most upholstery types. However, always test on an inconspicuous area first.

What should I do if the stains are not removed after the first application?

For stubborn stains, repeat the cleaning process 2-3 times as needed.

Is it safe to use on colored fabrics?

Yes, but it's recommended to test on a hidden area to ensure colorfastness before full application.