Concentrated Cleaner for Belts and Upholstery, 5L
Introducing our versatile Concentrated Cleaner, designed to tackle a wide range of stains including oil, grease, beverages, and organic marks. Perfect for cleaning upholstery, plastics, and various surfaces, this powerful solution can be applied using a sprayer or foamer. Ideal for both professional and home use, it ensures deep cleaning and stain removal with ease.
Main Benefits
- Effectively removes tough stains from belts and upholstery.
- Can be used on multiple surfaces including plastics.
- Suitable for both spray and foam application methods.
- Concentrated formula allows for customizable dilution ratios.
Typical Use Cases
- Cleaning heavily soiled upholstery.
- Removing stubborn stains from seat belts.
- General cleaning of plastic surfaces.
Technical Specifications
- Volume: 5000 ml
- Non-ionic surfactants: Less than 5%
- Fragrance components: Linalool, Butylphenyl Methylpropional
- Preservative: Benzisothiazolinone
Usage Instructions
- For upholstery: Wet with warm water, apply solution, brush, wait 3-4 minutes, then rinse with a wet vacuum.
- For belts: Stretch, wet with hot water (45-60°C), apply solution, wait 5-10 minutes, brush thoroughly, then wipe with microfiber or use a wet vacuum.
Safety Information
Warning: Causes skin irritation and serious eye damage. Wear protective eyewear. In case of skin contact, wash with plenty of water. If in eyes, rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Seek medical advice if irritation persists. Keep out of reach of children. Dispose of waste according to local regulations.
FAQ
Can this cleaner be used on all types of upholstery?
Yes, it is suitable for most upholstery types. However, always test on an inconspicuous area first.
What is the recommended dilution ratio?
For belt cleaning, use a 1:1 ratio. For heavily soiled upholstery, use a 1:7 to 1:10 ratio. For regular cleaning, dilute 1:10 to 1:25.
Is it safe to use on colored fabrics?
Yes, but it is advisable to test on a hidden area to ensure colorfastness before full application.