Compressed Air Drying Gun 360° Swivel Joint 7500 RPM Aluminium, BenBow

Quick Facts – BenBow Compressed Air Drying Gun

• Brand: BenBow
• Model: 009 Classic
• Swivel Joint: 360° rotating pneumatic joint
• Rotation Speed: approx. 7500 RPM via silicone hose
• Material: Aluminium and stainless steel
• Weight: 398 g
• Connection: 1/4" BSP for compressor hose
• Max Working Pressure: 9.2 bar

The BenBow compressed air drying gun dries the vehicle efficiently after washing thanks to a rotating silicone hose that creates a swirling airflow at approximately 7500 RPM. It blows moisture, dust and sand out of gaps and edges that a cloth or brush cannot reach. The tool runs on compressed air alone and has no reservoir for cleaning products.

The 360° pneumatic swivel joint means the hose doesn't twist during use, making it easier to work close to the bodywork or inside the cabin. A reinforcing metal ring around the nozzle protects the area where the hose rotates during operation.

The tool is suited to drying mirrors, trim, door frames and ventilation grilles, as well as clearing dust from compartments and hinges. See more detailing accessories in our range.

What makes the Compressed Air Drying Gun a strong choice for vehicle drying?

The rotating silicone hose in the BenBow gun creates a swirl effect that forces water and loose particles out of recesses rather than pushing them deeper in. This makes the tool particularly useful for drying mirrors, door trim and edges after washing. The 360°-rotating joint reduces the risk of the hose tangling or pulling on the bodywork during use.

How the Compressed Air Drying Gun is used in reconditioning workshops and detailing studios

• Drying ventilation grilles, compartments and hinges in the cabin
• Cleaning the space between the seat and centre console
• Drying door trim, mirrors and door edges after washing
• Removing dust, sand and crumbs from hard-to-reach surfaces

Technical Specifications

A fit for: Detailers, reconditioning workshops, car care businesses, mobile detailing studios and vehicle workshops with a compressed air installation.

Typical settings: The reconditioning industry, vehicle care, car workshops and detailing studios with access to a compressor of at least 200 l/min.

Frequently Asked Questions (FAQ)

Is the BenBow compressed air drying gun suitable for applying cleaning chemicals during drying?

No, the BenBow compressed air drying gun has no reservoir for cleaning products and operates exclusively with compressed air. The tool is designed to blow away moisture, dust and loose particles - not to spread chemicals. The working pressure should not exceed 9.2 bar for safe operation.

What compressor capacity is required to run the BenBow compressed air drying gun?

The BenBow compressed air drying gun consumes approximately 200 l/min and requires a working pressure of between 6 and 9.2 bar. A compressor with lower capacity may give a weaker swirl effect and insufficient drying. The connection is a standard 1/4" BSP for compressor hose, which fits most workshop compressors.

What sets the BenBow compressed air drying gun apart from other compressed air guns for vehicle drying?

The BenBow compressed air drying gun uses a rotating silicone hose at approximately 7500 RPM that creates a swirling airflow, unlike straight blow nozzles that only produce a single air stream. The 360°-rotating pneumatic joint reduces hose twisting during use, and a reinforcing metal ring protects the nozzle in the area where the hose rotates. The aluminium and stainless steel construction weighs 398 g.