Coating Microfibre Double-Sided 40x40 cm 300 GSM Black for Removing Excess Coating, Ultracoat

Quick Facts – Ultracoat Coating Microfibre

• Brand: Ultracoat
• Model: ULT000177
• Dimensions: 40 x 40 cm
• Density: 300 GSM
• Pile Type: Long & Short Pile (long and short pile on each side)
• Colour: Black
• Edge: Edgeless construction

Ultracoat Coating Microfibre Black is a double-sided microfibre towel designed to remove excess coating and buff out an even finish. The longer pile on one side collects excess product, while the shorter side is used for final polishing.

The edgeless construction reduces the risk of scratches when working close to the paintwork, and the towel measures 40 x 40 cm with a density of 300 GSM. The black version can be combined with a green variant to keep the different application steps separate.

See more microfibre towels for coating and polishing in our range for detailing and reconditioning work.

What problem does Ultracoat Coating Microfibre solve?

The towel solves the problem of uneven coating distribution by combining removal of excess product and final polishing in a single tool. Without the right towel, the applicator risks leaving streaks or unevenness that become visible in the paintwork after curing.

By using the longer pile to remove excess product and the shorter pile for finishing, a more even result is achieved with fewer steps. This makes the towel relevant both for routine work in reconditioning workshops and for less frequent hobby applications.

Where Ultracoat Coating Microfibre performs best

• When applying Ceramic Coating to painted surfaces
• When wiping off excess product immediately after application
• When final polishing for an even finish
• In detailing studios and reconditioning workshops with regular coating work
• Among enthusiasts applying protection in the home garage

See also more Ceramic Coating products in our range.

Technical Specifications

Suitable for: detailers, car care businesses, reconditioning workshops, ceramic coating installers, detailing enthusiasts

Industries: detailing, vehicle care, the reconditioning industry, car workshops, marine vehicle care

Frequently Asked Questions (FAQ)

Can Ultracoat Coating Microfibre from Ultracoat be washed with fabric softener or bleach?

No. Ultracoat Coating Microfibre should be washed separately from other fabrics using a detergent intended for microfibre. Fabric softener and bleach should not be used, as they break down the fibre structure and reduce the towel's performance during coating application.

How should Ultracoat Coating Microfibre from Ultracoat be cleaned and dried between uses?

Ultracoat Coating Microfibre is washed separately with a microfibre detergent and should then be air dried naturally, not in a tumble dryer. This preserves the pile and performance over time, which is relevant for professional use where the towel is used regularly in reconditioning workshops.

What sets Ultracoat Coating Microfibre from Ultracoat apart from other microfibre towels for coating?

Ultracoat Coating Microfibre stands out through its double-sided construction with both long and short pile in a single 300 GSM towel, covering two work steps - removing excess product and final polishing - in one tool. The edgeless border reduces the risk of scratches compared with simpler towels, and the black colour can be combined with a green variant for colour-coding application steps in professional use.