Clay Bar Hard 200g, WORK STUFF

Quick Facts – WORK STUFF Clay Bar Hard

• Brand: WORK STUFF
• Model: WOR000083
• Type: Clay bar – hard
• Weight: 200 g
• Application: Mechanical paint decontamination, removal of contaminants from painted surfaces
• Suitable for: Paint, glass, painted plastic trim

WORK STUFF Clay Bar Hard is a mechanical decontamination clay developed to remove embedded contaminants from painted surfaces that cannot be eliminated by conventional washing. The product weighs 200 g and is graded as hard, meaning it offers a more aggressive cleaning action compared to softer variants.

A clay bar is used as a step in the detailing process before polish, coating or sealant is applied. A clean and smooth paint surface is a prerequisite for subsequent products to bond and perform optimally. See more clay bar products for paint decontamination in our range.

What is WORK STUFF Clay Bar Hard and why choose it?

A clay bar works mechanically against the paint surface, lifting away particles such as iron oxide, asphalt, industrial fallout and other contaminants that have bonded to the paint. The hard variant from WORK STUFF is developed for surfaces with heavier contamination or for vehicles that have not undergone paint decontamination for an extended period.

Compared to softer clays, the hard variant delivers a more thorough cleaning action but requires careful lubrication with a suitable lubricant to avoid marring. It is well suited to professional detailers and reconditioning workshops handling vehicles in poorer condition.

Where is this product suitable?

• Detailing studios and reconditioning workshops with a high throughput of vehicles
• Car care businesses carrying out paint preparation prior to coating or polish
• Enthusiasts performing thorough paint decontamination ahead of seasonal treatment
• Vehicles with heavy contamination from industrial fallout, asphalt or iron particles
• Glass and painted plastic trim surfaces requiring mechanical decontamination

Technical Specifications

Suitable for: Professional detailers, reconditioning workshops, car care businesses and detailing enthusiasts carrying out thorough paint preparation prior to polish, coating or sealant.

Industries: Detailing, vehicle care, reconditioning, car care. See also more WORK STUFF products for detailing in our range.

Frequently Asked Questions (FAQ)

Does WORK STUFF Clay Bar Hard work on all paint surfaces?

WORK STUFF Clay Bar Hard is developed for paint, glass and painted plastic trim. The hard grade is recommended for surfaces with heavier contamination. It is important to always use a suitable lubricant when using a clay bar to minimise the risk of marring the paint. On sensitive or freshly painted surfaces, a softer clay bar should be considered.

How far does 200 g of WORK STUFF Clay Bar Hard go?

A 200 g clay bar from WORK STUFF is sufficient for several vehicles depending on the degree of contamination and the size of the surface being treated. The clay is divided into smaller pieces during use, which extends its service life. A piece must be discarded if it is dropped on the floor, as it may have picked up particles that could scratch the paint.

What distinguishes WORK STUFF Clay Bar Hard from softer clay bar variants?

WORK STUFF Clay Bar Hard has a more aggressive cleaning action compared to softer variants and is developed for vehicles with heavy contamination or surfaces that have not been treated for a long time. Softer clays are better suited to maintenance decontamination and more sensitive paint surfaces. The choice of grade should be based on the condition of the surface and the degree of embedded contamination.