Heavy Cut Foam Pad 90mm Blue Closed Cell, WORK STUFF

Quick Facts – WORK STUFF Heavy Cut Pad

• Brand: WORK STUFF
• Model: WOR000108
• Type: Heavy Cut Pad
• Diameter: 90 mm
• Height: 20 mm
• Material: Closed-cell foam
• Mounting: Hook and loop
• Colour: Blue

The WORK STUFF Heavy Cut Pad 90 mm is a high-abrasion foam pad designed to remove deep scratches, oxidation, and paint defects. The pad is manufactured from closed-cell foam, which maintains its cutting power throughout the entire polishing process.

The central hole aids correct pad alignment and heat dissipation, whilst the bevelled edge makes it easier to work in tight areas and around edges. Attachment is via a strong hook and loop system that provides a secure hold against the polishing machine throughout the entire run.

See more polishing pads for professional use in our range.

What is a Heavy Cut Pad and why choose it?

A Heavy Cut Pad is a heavy-cutting foam pad intended for the most demanding paint correction work on vehicle paintwork. It is used when Compound needs maximum bite to eliminate deep scratches, severe oxidation, or other serious paint defects that finer pads cannot address.

The WORK STUFF Heavy Cut Pad 90 mm is constructed from closed-cell foam, meaning the pad does not absorb Compound unnecessarily. This delivers consistent and controllable cutting performance from start to finish, which is essential for predictable results in professional paint correction.

Where is this product suitable?

• Professional detailing studios and bodywork workshops
• Car care businesses with a high throughput of vehicles
• Paint correction on passenger cars, vans, and motorcycles
• Preparation prior to Ceramic Coating or Sealant application
• Experienced hobbyists undertaking machine polishing

Technical Specifications

Suitable for: Professional detailers, bodywork workshops, and car care businesses working with paint correction on a daily basis. Also suitable for experienced hobbyists performing machine polishing with a DA polisher or rotary polisher.

Industries: Detailing, vehicle care, bodywork and reconditioning, paint refinishing, and preparation prior to protective treatments.

See more products from WORK STUFF for professional vehicle care.

Frequently Asked Questions (FAQ)

Is the WORK STUFF Heavy Cut Pad 90 mm compatible with all polishing machines?

Yes, the WORK STUFF Heavy Cut Pad 90 mm is fitted with a strong hook and loop system that is compatible with most standard DA polishers and rotary polishers on the market. Please ensure that your machine's backing plate has a hook and loop fitting of a suitable size for 90 mm pads.

What are the dimensions and specifications of the WORK STUFF Heavy Cut Pad 90 mm?

The WORK STUFF Heavy Cut Pad 90 mm has a diameter of 90 mm and a height of 20 mm. The pad is manufactured from closed-cell foam with high abrasion, attaches via hook and loop, and is blue in colour. The central hole aids heat dissipation and correct alignment during use.

What distinguishes the WORK STUFF Heavy Cut Pad 90 mm from other polishing pads in the same category?

The WORK STUFF Heavy Cut Pad 90 mm uses closed-cell foam, meaning the pad does not absorb Compound unnecessarily – unlike open-cell foam pads, which can soak up Polish and produce uneven results. The bevelled edge and central hole are design features that contribute to better control and a longer service life during intensive professional use.