Hard Cutting Compound 1+ Water-Based 250ml for Hard Clearcoat, Honey Combination

Quick Facts – Honey Combination Compound

• Brand: Honey Combination
• Model: HON000152
• Volume: 250 ml
• Type: Water-based Compound (cutting)
• Abrasive: Non-diminishing, no fillers
• Application: Hard clearcoats, Scratch Resistant, UHS, HS, MS 2K and 1K
• Surface after treatment: Slightly coarse, ready for further polishing

Hard Cutting Compound 1+ from Honey Combination is a water-based Compound designed for hard clearcoats and scratch-resistant surfaces. The non-diminishing abrasive provides consistent cutting action without fillers, making the compound suitable for both new paintwork and older surfaces that have lost their gloss.

The product works on Scratch Resistant, UHS, HS, MS 2K and 1K coatings, covering most clearcoats found in workshops today. After treatment, the compound leaves a slightly coarse surface ready for further Polish work to achieve a high-gloss finish. See more Compound and polishing products in our range.

What makes Hard Cutting Compound 1+ a strong choice for hard clearcoat?

Hard Cutting Compound 1+ suits hard clearcoat thanks to its water-based, non-diminishing abrasive that delivers consistent cutting action without fillers. The compound is built for Scratch Resistant, UHS, HS, MS 2K and 1K coatings and works equally well on new paintwork as on older surfaces that need refreshing.

As the abrasive does not break down during polishing, the cutting action remains consistent throughout the process, giving a predictable result for professionals working with paint care.

Is Hard Cutting Compound 1+ suited to new coatings and older paintwork?

Yes, Hard Cutting Compound 1+ is suited to both new coatings and older paintwork that needs restoring. The compound is used in several different situations in the workshop:

• Newly painted panels with Scratch Resistant, UHS, HS, MS 2K or 1K coating
• Older clearcoat that has lost its gloss and needs Compound cutting
• Spot repairs after paint damage before final polishing
• Preparation before Ceramic Coating or Sealant application

Technical Specifications

Suitable for: Hard Cutting Compound 1+ is suitable for detailing studios, reconditioning workshops and car care businesses working with hard clearcoats, as well as enthusiasts wanting to restore paintwork in the home garage.

Industries: Detailing, vehicle care, the reconditioning industry and vehicle paint refinishing.

Frequently Asked Questions (FAQ)

Does Hard Cutting Compound 1+ from Honey Combination work on soft paintwork or only hard clearcoats?

No, Hard Cutting Compound 1+ from Honey Combination is designed specifically for hard clearcoats and scratch-resistant surfaces such as Scratch Resistant, UHS, HS, MS 2K and 1K. On softer paint types, the non-diminishing abrasive may produce a stronger result than necessary, so a milder Compound is recommended instead.

How should Hard Cutting Compound 1+ be stored, and how much is needed per panel?

Hard Cutting Compound 1+ from Honey Combination should be stored cool and dry, kept tightly sealed between uses to maintain its consistency. Usage depends on the extent of the damage and the pad type, but a 250 ml container is normally enough for several treatments of smaller panel areas. More Honey Combination products for paint care.

What sets Hard Cutting Compound 1+ from Honey Combination apart from other compounds on the market?

Hard Cutting Compound 1+ from Honey Combination is water-based and contains a non-diminishing abrasive with no fillers, providing more consistent cutting action throughout the polishing process compared with compounds where the abrasive breaks down progressively. This makes the result more predictable for professionals working with hard clearcoats.